Wood stoves / Pacific Energy

Listed on the maker's page · checked 2026-10-20

Pacific Energy Super LE wood stove

Pacific Energy rates the Super LE for Up to 2,000 sq ft with an output of 72,000 BTU/h (maximum heat output on cord wood). The firebox holds 2.1 cubic feet, #13 by size of the 20 stoves listed here, and particulate emissions are 1.8 g/h, 90% of the EPA's 2 g/h limit.

1234
  1. 1Heating area Up to 2,000 sq ft
  2. 2Output 72,000 BTU/h
  3. 3Firebox 2.1 cu ft
  4. 4Particulate 1.8 g/h
SpecificationPacific Energy Super LE
Heating areaUp to 2,000 sq ft
Output72,000 BTU/h (maximum heat output on cord wood); 38,200 BTU/h on EPA test fuel
Efficiency71.3% HHV (HHV efficiency)
Particulate emissions1.8 g/h
Firebox2.1 cu ft
Log lengthup to 18 in
FlueNot published
WeightNot published
Burn timeNot published
Same published ratingsPacific Energy Alderlea T5 LE, Pacific Energy SuperLE 27HD
Drolet Myriad III90,000 BTU/hPacific Energy Neo 2.5 LE85,000 BTU/hOsburn 200075,000 BTU/hPacific Energy Super LE72,000 BTU/hPacific Energy Vista LE56,000 BTU/h
Published output of the Pacific Energy Super LE and the four listed stoves closest to it. Makers define the figure differently (maximum, top of the EPA test range, or constant output on High); each stove's page says which. Bars to scale from zero.

What the Super LE heats

On this site's floor-area pages the Super LE appears for the up to 1,200 sq ft and 1,200 to 2,000 sq ft and 2,000 sq ft and up bands. At its top rating of 2,000 sq ft, a 1970s house in Oregon needs about 30,049 BTU/h on a 0°F night, below the stove's 72,000 BTU/h. The same floor area built before 1950 in North Dakota needs about 38,448 BTU/h, which the published output still covers.

Floor area1970s house, OregonPre-1950, North DakotaWithin 72,000 BTU/h?
1,000 sq ft15,02419,224Both
1,500 sq ft22,53728,836Both
2,000 sq ft30,04938,448Both
2,500 sq ft37,56148,061Both

These are estimates from average use, not a heat-loss calculation of a real house, and a stove heats the room it stands in first.

Wood it burns in a winter

With its published 71.3% efficiency, heating 2,000 sq ft (built in the 1970s) on generic 20 million Btu cords takes about 4.1 cords in Oregon and 7.1 cords in North Dakota. It takes logs up to 18 in, so standard 16-inch face-cord wood fits; University of Maryland Extension suggests cutting wood about 3 inches shorter than the firebox.

The species that burn best in any stove are the dense hardwoods Utah State rates excellent overall: osage-orange (30.5), black locust (28.3), white oak (27.9), apple (27), bur oak (26.3) million Btu per cord. Burn them dry; see how to season firewood.

Emissions and EPA rules

At 1.8 g/h the Super LE is 90% of the EPA's May 15, 2020 limit of 2 g/h and 72% of the 2.5 g/h limit for stoves certified on cord wood. It burns without a catalyst. The EPA rules guide explains the limits.

Similar stoves

Source: Pacific Energy, Super LE product page, checked 2026-10-20. Ratings are the maker's own; installation clearances and permits follow the installation manual and local code. See the methodology.